NEW PRODUCTS

Scorpio supports innovation and creativity in the STEM areas of Science, Technology, Engineering and Mathematics. Our products suit the Australian Curriculum requirements and have an emphasis on LEARN TO MAKE. MAKE TO LEARN.

Our product range has expanded to include PHYSICS, PRIMARY SCIENCE, SECONDARY SCIENCE. Check out the CLEARANCE (SALE) page for BIOLOGY, CHEMISTRY and more.

We are happy to introduce some of our new products. There are just too many to list here! More are on the way! All our prices include GST.

Captive Aeroplane with the Lot

Code: CAPTIVE-WTL

Our popular introductory kit now also comes in a new version that includes all parts including bamboo (for the fuselage), HIPS - High Impact Polystyrene - (for the wings and tail section), fishing line and a snap swivel. A comprehensive teaching unit is included. Experiment with design!

A great STEAM kit kit for both senior primary and junior secondary school students, Home Education students and hobbyists, where there may be limited access to such things as single pieces of bamboo, etc.

Price: $11.00

NOTE: Our traditional Captive Aeroplane and Captive Aeroplane - No Solder kits are still available.

Mark’s Monster with the Lot

Code: MMWTL

Introducing a new version Mark’s Monster kit but now with all parts provided including pre-cut plywood body parts and wiring. This kit is great for classroom use, Home Education settings and for hobbyists who are looking for a STEM (or STEAM) project but have limited to access to such things as small pieces of material to make the body and handheld controller.

A comprehensive teaching unit is included.

Price: $16.50

NOTE: Our traditional Mark’s Monster and Mark’s Monster - No Solder kits are still available.

Wind Generator - Breadboard Project

Code: WINDGENBRBD

The WIND GENERATOR project allows the user to construct a model wind generator that can be used to demonstrate how wind energy is used to create electrical energy. By connecting the Breadboard to the kit’s components and using Jumper wires, and alligator clips with wires to the generator, it allows visual monitoring of the Wind Generator’s electrical output, by using the graduated LED display.

The use of the breadboard, instead of the PCB (Printed Circuit Board), means that the project can be made without the need for soldering.

Price (ea): $24.80 (1-19); $24.55 (20+)

Clinicare Alcohol Free Disinfectant Wipes - Canister

Code: DL2321

Clinicare – Alcohol Free Instrument Grade – Disinfectant Wipes.
Decontaminate and disinfect surfaces within the healthcare environment without alcohol. Canister of 180 wipes.

(Not for personal use or as baby wipes. Wash hands after use).

Price: $23.50

NOTE: Also available in a flat pack with 200 disinfectant wipes (Code: DL2371) . Price: $23.00

Apron provides excellent clothing protection against dust, fluids, and contaminants.
Tie back easy for adjustment and security.
One size fit all.
Non-sterile.
Box of 100.

Price: $10.50

Resistance Board - Equal Length Wire of Same Material & Different Diameters

Code: EM1088018

Apparatus to investigate and calculate the resistivity of the same resistance wire of equal length but different diameters (gauges).  How does the diameter (and therefore the cross-sectional area) of a wire affect resistivity?  Comprises of a set of 8 nichrome wires, each 60cm long, of different gauges mounted on a timber laminate board with decimeter increments.  The board dimensions are 65 cm long by 22 cm wide. 

Requires a Multimeter (with 2 leads with probes) and Banana plugs. Without instructions.

Resistance Board - Mixed Materials - Equal Length and Same Diameter

Code: EM1088019

Apparatus to investigate and calculate the resistivity of the higher resistance wires and compare them with theoretical values.  Comprises of a set of 8 wires, each 60cm long, made from different materials mounted on a timber laminate board with decimeter increments. The materials are Aluminium, Brass, Constantan, Copper, Iron, Nichrome, Silver and Stainless Steel. The board dimensions are 65 cm long by 22 cm wide. 

Requires a Multimeter (with 2 leads with probes) and Banana plugs. Without instructions.

NOTE: Board material may differ from illustration.

SPECIAL INTRODUCTORY OFFER: Buy all three types of Resistance Boards (AR3835/185, EM1088018 and EM1088019) in one transaction and get 5% off the total price of these items. Offer valid until 31st October, 2024.

Breadboard Experimenter Kit

Code: BRBRD830EXPKIT

Breadboard experimenter kit containing an 830 tie-point breadboard, 3.3V/5V Power Module., 65 flexible jumper wires and an assortment of other components.

Price: $26.00

Safety Glasses Rack - Fits 30 Pairs

Code: LWGLSRK

Composite wood safety glass storage rack measuring 47 x 18 x 40cm.

Price: $80.00

Lens Set - 50mm Diameter in Storage Container

Code: LENSKIT50

Set of 50mm (5cm) dia. biconcave and 50mm (5cm) dia. biconvex lenses of various focal lengths (FL) in handy storage container. 
Comprises of 36 lenses in total in the following combinations:
Biconcave lenses: 6 x FL: 15cm, 6 x FL: 20cm, 6 x FL: 25cm.
Biconvex lenses: 6 x FL: 15cm, 6 x FL: 20cm, 6 x FL: 25cm.

Price: $119.00

Mirror Set - 50mm Concave in Storage Container

Code: MIRCCSET50

Set of 50mm (5cm) diameter concave mirrors of various focal lengths (FL). Total of 36 mirrors. Unmounted spherical mirrors, optically worked, silvered back with protective coating.  Mirrors supplied in plastic storage container.

Comprises of:
6 x FL: 7.5cm (75mm); 6 x FL: 10cm (100mm); 6 x FL: 15cm (150mm); 6 x FL:  20cm (200mm); 6 x FL:  30cm (300mm); 6 x FL:  50cm (500mm)

Price: $91.00

Mirror Set - 50mm Convex in Storage Container

Code: MIRCVSET50

Set of 50mm (5cm) diameter convex mirrors of various focal lengths (FL). Total of 36 mirrors. Unmounted spherical mirrors, optically worked, silvered back with protective coating.  Mirrors supplied in plastic storage container.

Comprises of:
6 x FL: 7.5cm (75mm); 6 x FL: 10cm (100mm); 6 x FL: 15cm (150mm); 6 x FL:  20cm (200mm); 6 x FL:  30cm (300mm); 6 x FL:  50cm (500mm)

Price: $94.00

Bubble Blower v2 (8-12 hours)

Code: BUBBLEV2 solder version
Code: BUBBLEV2-NS no solder version

This device is designed to automatically blow bubbles! One motor, driving through a gearbox, constantly rotates 6 wire hoops, which continuously dip into a vessel holding the bubble mixture. The propeller (driven by a second electric motor) blows air into the hoops, producing a constant stream of bubbles.

PLEASE NOTE: The original version of the Bubble Blower kit has been phased out and has been replaced by the v2 model containing an unassembled gearbox.

Price (per kit): $12.08 (1 - 19 kits); $11.66 (20+ kits) - Solder version
Price (per kit): $13.28 (1 - 19 kits); $12.65 (20+ kits) - No solder version

FERRIS WHEEL V3

Code: FERRISV3
Code: FERRISV3-NS (no solder version)

The FERRIS WHEEL project allows the student to design and construct their own working version of the popular fairground ride. The project leaves plenty of opportunities for the student to use their imagination and display their design and construction skills.
It is powered by a low speed motor gearbox powered by a 3 volt battery pack. It can be operated momentarily by a pushbutton switch. It also allows the student extra scope to add additional buildings (ticket box, etc.) and lighting and sound to the project using additional circuitry.

NOTE: The No-solder version has a motor and switch with wires pre-soldered to them, with twist-on connectors to join the wires.

PLEASE NOTE:  These v3 versions of the Ferris Wheel kits with unassembled gearboxes are replacing the v2 models containing an assembled gearbox.

Price (per kit): $11.66 (1 - 19 kits); $11.34 (20+ kits) - Solder version
Price (per kit): $12.44 (1 - 19 kits); $12.08 (20+ kits) - No solder version

LED RAY BOX WITH USB CABLE

Code: PH0600USB

5V Ray box with bright cool white LED and On/Off switch on top of unit for easy operation. Supplied with USB cable to connect up to your laptop for power, making this unit very mobile. Comes with a slit plate and cylindrical lens.

Price: $67.50

RESIN ART CLOCK PROJECT

The RESIN ART CLOCK is a Materials & Technologies Specializations focused project which allows students to create a personalized clock face using coloured Epoxy Resin. Student’s can mix, pour and manipulate the resin into the desired patterns to create a unique clock face, of their own design. This Clock making project is suitable for students in years 8 to 12 in a supervised environment.

More information is available in the Overview.

Two Class packs sizes are available:

For 10 Students
Code: RESART10
This kit contains enough 25cm clock faces, movements, hands, hangers and numerals for 10 clocks. It includes 1.0L of resin and 6 x 10g colour packs.
The colours are: Dark Blue; Light Blue; White; Black; Gold; Green
Price: $298.70

For 20 Students
Code: RESART20
This kit contains enough 25cm clock faces, movements, hands, hangers and numerals for 20 clocks. It includes 2.0L of resin and 8x 10g colour packs.
The colours are: Dark Blue; Light Blue; White; Black; Gold; Purple; Green; Red
Price: $576.80

ELECTRICITY & MAGNETISM SET

Code: ELEM2

This kit is not only a perfect starter set, but also for teachers who want additional materials for their existing labs.  Batteries and experiment guide not included. 37 pieces for conducting a wide variety of physics experiments in electricity and magnetism:
· Stackable Single Cell Holders
· Red & Black Crocodile Leads-30cm
· Red & Black Banana Plug Leads-30cm
· Resistance Coils
· Rheostat on Base
· Bulb Holders
· Push Switches
· Voltmeter and Ammeter
· Electroscope
· Assorted Materials - Silk cloth, 2 PVC rods, acrylic strip, electrolysis apparatus, cupric sulfate, support rod & L-base and wire coil
Assorted Magnets - Bar magnet, U-form electromagnet with keeper, U magnet, electro bar magnet, iron filings, magnetic needle, magnetic needle stand and micro fine wire.
Price: $165.00

BEAKERS - BOROSILICATE GLASS - LOW FORM - 400ML (PACK OF 6)

Code: CH0126HPK6

Pack of 6 low form beakers made of Borosilicate 3.3 Glass. 400ml capacity. Each beaker features white graduations every 50ml, as per DIN 12231. Spout for easy pouring. Uniform walls provide excellent strength against breakage.
Beaker stands at approx. 109mm (4.3") tall, and has an inner diameter of 77.5mm and an outer diameter of 80mm. Designed for use in professional laboratories, but ideal for classroom, garage and home use.

Heat tolerances:
Strain Point -515°C
Annealing Point 565°C
Softening Point 820°C.

Price: $39.00