This is the AIR TRACK AIR TUBE ASSEMBLY KIT only.

It is normally supplied with the Air Tube, but it is also available separately and is the same exactly for both 2m and 2.5m Air Tracks. It contains mainly the sets of feet, level adjusting screws, the end caps and 'o'ring seals and screws for the tube. Including the metric tape that fits the length of the track and the end plug that blocks the air.
This kit of parts is used to assemble the Linear Air Track. The ‘brace plate’ is positioned between the tube and the mouldings to exert a pre-stress on the moulded feet towards the table to stop flexing of the feet upwards.
The 16mm wide tape measure is slid up the slot provided in the Air Track tube. The excess length can be cut off if desired.
Instruction Sheet included.
Genuine IEC product.